BECKHOFF AX5000 1,5 A - 40 A - Manual (Page 37)

BECKHOFF Drive Technology 5 Installation
AX5000 Version : 4.6 37
5.2.3.1 Connection example - module AX5901 and AX5911 (AX Bridge)
This connection option enables a safe system to be set up very quickly. The modules are
attached to plug contacts X01, X02 and X03, the relevant slides are pushed to the left and
screwed tight. According to CE the current carrying capacity of power busbars of the
AX Bridge is limited to 85 A.
CAUTION
Hazard to inviduals through electric shock
Move all busbar sliders to the left limit stop in order to ensure full current
carrying capacity. Then tighten all screws with a torque of 2.2 Nm.
CAUTION
Hazard to inviduals and equipment
Please ensure that the connection line for the AX5901 supply module is
adequately dimensioned. The dimensioning depends on the total rated
current and must comply with EN60204-1.
The supply connection is established as described in sections 5.2.1 and 5.2.2.
Information of the terminal points
Terminal points Conductor design max. Conductor
cross-section
Tightening torque
L1-L3, PE single wire 10 mm
2
2,2 Nm
L1-L3, PE flnely stranded with
wire end sleeves
16 mm 2 2,2 Nm
L1-L3, PE flnely stranded /
stranded
25 mm
2
2,2 Nm