Datalogic Scanning FALCON 4400 SERIES - Manual (Page 11)

Product Reference Guide 1-1
Chapter 1
Batteries and Power
Overview
This section contains the following topics:
• Suspend Mode, p. 1-1
• Battery Warnings and Cautions, p. 1-2
• Battery Disposal, p. 1-4 .
Suspend Mode
The Falcon will go into a suspend or sleep mode when it is idle for a period of
time. This duration can be customized using the on-screen
Power control
panel (refer to Advanced Tab, p. 2-22 ). Suspend mode works and looks just
like you have turned the unit off. Press <POWER> to suspend (put to sleep) the
Falcon. Press <POWER> again for the Falcon to resume its previous state.
Use the Power control panel to set the idle duration and the initiation of sus-
pend mode. These features save battery power when the Falcon is not in use.
Refer to Advanced Tab, p.
2-22 for more information.
Suspending
The following conditions will put the unit into suspend (sleep) mode:
1. When the unit is on, press <POWER> for 0.5 seconds to initiate sus-
pend mode.
2. When the sleep timer expires, indicating that there has been no use
for a specified period of time.
3. A discharged battery pack.