Datalogic Scanning FALCON 4400 SERIES - Manual (Page 30)

Configuration Settings
2-16 Falcon ® 4400 Series with Windows Mobile ®
Image File
1. Specify where you want images to
be saved in the File Folder field. If
you do not select a folder, images
will be saved to the default folder
“\Images.” Use the
… button to
browse to a different folder.
2. Use File Format to select the image
format you want. You can choose
between the following graphics
formats:
• TIFF (1-bit monochrome)
• TIFF (8-bit grayscale)
• JPEG (8-bit grayscale)
• BMP (1-bit monochrome)
• BMP (8-bit grayscale)
3. Check Confirm before Saving File to automatically get a File Save mes-
sage when saving images (see Figure 2-12B). If unchecked, the file will
automatically save to the default file folder without prompting.
4. Check Exit after Image Capture to cause the Imaging Control Panel to
close automatically after saving the image to a file.
5. Enable Long Range Filter enhances pictures taken from very long dis-
tances (greater than 10 feet or 3 meters).
6. Enable Aimer Illumination turns on the aiming LEDs to provide more
light for an image capture.