Measuring blood pressure – Beurer BM 49 User Manual

Page 47

Advertising
background image

47

Voice output

Volume

Volume level Vo1 flashes on the display.

• You can set the volume of the selected language using the func-

tion buttons :

Vo3 = loud

Vo2 = medium

Vo1 = quiet

Confirm your selection with the Memory button .

Operation with the mains part
You can also operate this device with a mains part.

When doing so, there must not be any batteries in the battery compartment. The mains part can be ob-

tained from specialist retailers or from the service address using order number 071.60.

• To prevent possible damage to the device, the blood pressure monitor must only be used with the mains

part described here.

• Insert the mains part into the connection provided for this purpose on the right-hand side of the blood

pressure monitor. The mains part must only be connected to the mains voltage that is specified on the

type plate.

• Then insert the mains plug of the mains part into the mains socket.

• After using the blood pressure monitor, unplug the mains part from the mains socket first and then dis-

connect it from the blood pressure monitor. As soon as you unplug the mains part, the blood pressure

monitor loses the date and time setting but the saved measurements are retained.

5. Measuring blood pressure

Please ensure the unit is at room temperature before measuring.
Attach the cuff
Place the cuff on to the

bare left upper arm. The

circulation of the arm

must not be hindered

by tight clothing or

similar.

The cuff must be placed

on the upper arm so

that the bottom edge

is positioned 2 – 3 cm

above the elbow and

over the artery. The line

points to the centre of

the palm.

Now tighten the free end

of the cuff, but make

sure that it is not too

tight around the arm

and close the Velcro

fastener. The cuff should

be fastened so that two

fingers fit under the cuff.

Now insert the cuff line

into the connection for

the cuff connector.

Caution: The unit may only be operated with the original cuff. The cuff is suitable for an arm circumference

of 22 to 36 cm.

A larger cuff for upper-arm circumferences of 35 to 44 cm can be obtained from specialist retailers or from

the service address using order number 163.387.

Advertising