Beurer BM 49 - Manual (Page 52)

52
accuracy by appropriate means. Precise instructions for checking accuracy may be requested from the
service address.
11. Mains part
Model no. FW 7575M/EU/6/06
Input 100 – 240 V, 50 – 60 Hz
Output 6 V DC, 600 mA, only in connection with beurer blood pressure monitor.
Supplier Friwo Gerätebau GmbH
Protection This device is double insulated and protected against short circuit and
overload by a primary thermal fuse.
Make sure to take the batteries out of the compartment before using the
mains part.
Polarity of the the DC voltage connection
Double insulated / equipment class 2
Enclosures and Protective
Covers
Equipment enclosed to protect against contact with live parts, and with
parts which can become live (finger, pin, hook test).
The operator shall not contact the patient and the output plug of AC
mains part simultaneously.