Beurer GL 40 (mg/dL) User Manual
Page 12
Advertising
![background image](/files/775613/content/doc012.png)
12
Beurer GL40 mg/dL
3.4 Test strips
Front view
Rear view
3
2
1
1 Slit for blood collection
2 Hold here
3 Contacts
You will know which side is the rear from
the contact panels.
Insert the test strip into the unit so that the contacts are visible in the slit. Ensure that the front side
of the test strip is facing you.
Note
Read the following information about handling and storing your test strips carefully. The test strips
are guaranteed to yield accurate measurement results only if you observe all instructions.
Warning
• Each test strip is to be used only once and only for one patient!
Handling test strips
Note
• Once you have removed the test strip, tightly close the container again immediately.
Advertising