Beurer GL 40 (mg/dL) - Manual (Page 18)

18 Beurer GL40 mg/dL
10 Place the protective disk you kept earlier flat on a hard
surface. Pierce the protective disk with the tip of the
needle so that the needle is covered.
11 Slide the lancet ejector towards the needle lancet until
the needle lancet is released from the lancing device.
Dispose of the lancet in a sharp-proof container.
Carefully dispose of all blood samples and materials
with which you have come into contact. This prevents
injury and prevents infection spreading to other people.
12 Twist the (white) cap back in place.
5.2 Measuring the blood glucose value
1 Hold the measuring device so that the display is facing you.
2 Insert a test strip, contacts first, into the unit. Ensure that the front side is facing you.
You can handle any part of the test strip with clean, dry hands.
3 The unit switches on automatically and shows the start display. As soon as the hand
and symbols are flashing, the unit is ready to perform measurements.