Beurer GL 40 (mg/dL) - Manual (Page 14)

14 Beurer GL40 mg/dL
Note
• When the battery change symbol appears, the batteries are almost empty. Replace both bat-
teries as soon as possible.
• When “ LP” is displayed, the batteries are so empty that no more measurements are possible.
4.2 Basic settings
1 Remove the batteries and then reinsert them. A beep sounds.
The year display flashes.
2 Setting the date and time
Note
• You must set the date and time. Only if you do that can you save your measured values cor-
rectly with the date and time and later retrieve them.
• The time is displayed in 24-hour format.
Set the year (calendar extends to 2099) by pressing the or button.
Confirm via the ON/OFF button [3].
The day display flashes.
Repeat the above procedure for the day, month, hours and minutes.
" " and the speaker symbol are displayed.
3 Turning the beep on/off
To turn off the beep, press the or button. " " is displayed.
The speaker symbol disappears from the display.
Confirm via the ON/OFF button [3].
4 The measuring device switches off automatically.
5 M
eAsurinG Your blood Glucose
Warning
• If the protective disc on a lancet needle has already been removed, do not use the lancet needle.
• If you drop the lancing device while a needle lancet is inserted, pick it up carefully and dispose of
the lancet.
Important
• Use the lancing device only with needle lancets from the manufacturer. Use of other needle lancets
can impair the function of the lancing device.
• If the lancing device is manufactured by a third party, consult their instructions for use.