Beurer GL 40 (mg/dL) - Manual (Page 5)

Beurer GL40 mg/dL 5
1.1 Delivery scope, replacement parts and accessories
Inspect your set for external damage to the carton packaging and for completeness of the content.
Before use, ensure that all packaging materials are removed and that there is no visible damage to
the unit or accessories. When in doubt, do not use the unit and contact your dealer or the customer
service address provided.
A 1 Blood Glucose Monitoring device
B 1 lancing device with AST cap for taking blood samples from alternative sites
C 10 test strips
D 10 sterile needle lancets
E 2 button cell batteries 3 V CR2032 (pre-installed)
F 1 practical carry case
G 1 USB cable
These instructions for use, additional information material
• If the box has sustained extensive damage or if any contents are missing, please return the system
to the retailer.
• The Blood Glucose Monitoring device, test strips and control solutions (LEVEL1 + LEVEL2 - avail-
able to purchase separately) are all designed to be used together. Therefore use only the test strips
and control solution intended for this measuring device.
Note
• Only use the manufacturer's original accessories.