Beurer GL 40 (mg/dL) - Manual (Page 25)

Beurer GL40 mg/dL 25
Important
Use only the USB cable provided for data transfer. Otherwise you may damage your blood glucose
monitor or PC.
Preparation
• Set the Blood Glucose Monitoring device near your computer.
• Install the blood glucose diary software on your PC as described in the instructions for use of the
software.
Transferring your measurement data
1 The measuring device must be switched off.
Insert the larger, flat USB connector of the connec-
tion cable into a USB port on your computer. Insert
the mini USB connector into the integrated PC inter-
face socket on the GL40 monitor.
2 "-> PC" appears in the display of the measuring de-
vice. The measuring device is now ready for data
transfer.
3 Follow the information on data transfer and evaluation provided in the software and the in-
structions for use of the software.
7 s
torAGe And MAintenAnce of the unit
Storing your unit
Store the measuring device after each use in the case provided.
Note
• Keep these instructions for use.
• If you will not use the unit for a prolonged period, remove the batteries.
Maintenance
The surface of the unit can be cleaned with a damp cloth (moistened with water or a mild cleaning
solution). Dry the unit using a lint-free cloth.
If used by more than one person, please follow the generally applicable regulations concerning dis-
infection. Never dip or immerse the device in disinfectant solutions or any other liquid, and ensure
that no liquids can penetrate to the interior of the device.