Beurer GL 44 (mg/dL) - Manual (Page 15)

Beurer GL44 mg/dL 15
2 Setting the date and time
Note
• You must set the date and time. Otherwise, you will not be able to save your measured values
correctly with a date and time to retrieve them later.
• The time is displayed in the 24-hour format.
Set the year (calendar to 2099) by pressing the “+” or “–” button. Confirm by pressing the On/
Off button [4].
The day display flashes.
Proceed as described above for the month, day, hour and minute.
“ ” and “ ” will be displayed. The background of the display is simultaneously illumi-
nated for a few seconds.
3 Switch backlighting on/off
To switch the blue backlighting off, press the “+” or “–” button.
“ ” and “ ” will be displayed. Confirm by pressing the On/Off button [4].
“ ”, “ ” and the speaker symbol are displayed.
4 Switching the acoustic signal on/off
To switch the acoustic signal off, press the “+” or “–” button.
“ ” and “ ” is displayed.
The speaker symbol is no longer shown in the display.
Confirm by pressing the On/Off button [4].
“Mem” and “ ” are displayed.
5 Deleting stored values
Proceed as follows to delete stored values:
• Press the “+” or “–” button. “Mem” and “ ” are displayed
• Confirm by pressing the On/Off button [4]. “Mem” and “ ” flash in the display.
• To irreversibly delete your values, press the On/Off button again to confirm. “Mem”, “ ” and
“ ” are displayed.
If you do not wish to delete your values, press the “+” or “–” button. “Mem” and “ ” are dis-
played again. Confirm by pressing the On/Off button.
6 The blood glucose monitor is now ready for operation