Beurer GL 44 (mg/dL) - Manual (Page 27)

Beurer GL44 mg/dL 27
6.2 Displaying average blood glucose values
You can display the average measured blood glucose value from the last 7, 14, 30 and 90 days.
1 Switch the monitor on using the on/off button [4]. The initial display is shown briefly. Press
the “+” rocker switch twice [6].
The measurement unit of the blood glucose value, “ ” and the average value are displayed.
2 Press “+” [6] repeatedly to display the average value for 7, 14, 30 and 90 days.
3 You can cancel the process at any time. For this purpose, press the On/Off button or wait
until the device switches itself off automatically after two minutes.
Pos. Explanation
1
2
3
1 Average value
2 Time period, e.g. 7
3 Number of saved values used to calculate the aver-
age
6.3 Displaying average blood glucose values for highlighted values
You can display the average measured blood glucose value for highlighted values from the last 7,
14, 30 and 90 days.
1 Switch the monitor on using the on/off button [4]. The initial display is shown briefly. Press
the “+” rocker switch twice [6].
The measurement unit of the blood glucose value “ ” and the average value of all meas-
urements are displayed.