Configuring dual purpose microphone inputs on, The host mixer – Cloud Electronics PM12 User Manual
Page 26
PM4/8/12/16 Installation and User Guide v2.2
26
Configuring dual purpose microphone inputs on the Host Mixer
NOTE: This section is only applicable to systems using Cloud Integrated Mixers
Models 36/50 or 46/50, or Zone Mixers Models CX263 or CX163.
On these mixers, Mic 1 input needs to be configured for paging use with a Cloud
PM by enabling the Mic Access input on the rear panel. Without the Mic Access
input enabled, Mic 1 input acts only as a general purpose microphone input and is
permanently active.
The table below lists the jumpers within each host mixer that need to be changed.
Mixer
Zone 1
Zone 2
Zone 3
Zone 4
Utility Zone
36/50
J2
J3
J4
46/50
J23
J22
J21
J20
CX263
J4
J5
J6
CX163
J1
J2
J3
Full details of how to enable the Mic Access input can be found in the installation
guide supplied with the mixer, or at