Compuprint 10300 - Manual (Page 103)

99
Adjusting the Distance of the Print Head
QUIET PRINT OFF
↑
AUTOGAP -5 → or ←
AUTOGAP ... → or ←
AUTOGAP +3 → or ←
MANUAL GAP → or ←
FIXED GAP 0.3 → or ←
FIXED GAP ... → or ←
FIXED GAP 9.3 → or ←
↓
TUNING: HORIZ 0
AUTOGAP xxx Selecting one of these values sensing the paper thickness. Negative values reduce
the distance between the print head and the paper. Default value is AUTOGAP 0.
MANUAL GAP Selecting this item, the print head must be adjusted manually.
FIXED GAP xxx Selecting one of these values the printer adjusts the print head gap to a fixed
distance.