Comtech EF Data SLM-5650A - Manual (Page 101)

SLM-5650A Satellite Modem Revision 8
Front Panel Operation MN-SLM5650A
5–19
CONFIG: Rx  Misc  Clk/DataPhase
Rx Clock Phase: Normal
Data Phase: Normal (E)
First, use the arrow keys to select Rx Clock Phase or Data Phase, and then press
[ENT]. Then, for either, use the  arrow keys to select Normal or Invert. Press
[ENT] when done.
CONFIG: Rx  Misc  BitOrdering
BPSK Bit Ordering: Standard
Non-Standard (E)
Use the arrow keys to select BPSK Bit Ordering (for BSPK compatibility) as
Standard or Non-Standard, and then press [ENT].
CONFIG: Tx  Misc  Eb/No Threshold
Eb/No Threshold: 00.1 dB
(E)
Use the  arrow keys to select a digit to edit, and then use the  arrow keys to edit
the value of that digit. This sets an Eb/No threshold such that, when the received carrier
Eb/No is less than the set value, the Rx threshold alarm is set. The valid range is 0.1–20 dB
(in 0.1 dB steps). Press [ENT] when done.
CONFIG: Rx  CnC
Carrier-in-Carrier(CnC): Mode:Off
Acquisition SearchDelay (E)
Use the arrow keys to select Mode, Acquisition, or SearchDelay, and then press [ENT]. If
Mode is selected, use the  arrow keys to select either On or Off. Press [ENT] when done.