Comtech EF Data SLM-5650A - Manual (Page 391)

SLM-5650A Satellite Modem Revision 8
Appendix C MN-SLM5650A
C–39
C.6.8 Gigabit Ethernet Interface Commands / Queries
The instruction codes that follow are valid only when the optional 10/100/1000 BaseT Gigabit Ethernet Interface Module is installed in the
SLM-5650A Satellite Modem.
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
GigaBit
Ethernet
Interface
Management IP
Address and
Range
GIP= 18 bytes Command or Query.
Used to set the IP address and network prefix for the GigaBit Ethernet Interface
Management port, in the form aaa.bbb.ccc.ddd.ee, where:
aaa.bbb.ccc.ddd = IP address, and
ee = network prefix (0-31)
Example: 010.006.030.001.24
N/A GIP? GIP=aaa.bbb.ccc.
ddd.ee
(see Description
of Arguments)