Comtech EF Data SLM-5650A - Manual (Page 90)

SLM-5650A Satellite Modem Revision 8
Front Panel Operation MN-SLM5650A
5–8
5.2.3 SELECT: Configure
CONFIG: Tx Rx Mode AUPC Transec
AntHndOvr Ref Mask Reset Remote (E)
Use the  arrow keys to select a configuration submenu, and then press [ENT].
Submenu Description
Tx (Transmit)
Select to configure the Tx parameters. This menu is not accessible if the modem has been
set to Demod Only.
Rx (Receive) Select to configure the Rx parameters.
Mode Select to configure the modem operating modes.
AUPC
Select to configure the AUPC parameters. This menu is selectable only if the modem type
has been set to AUPC.
Transec Select to configure the TRANSEC Module operation.
AntHndOvr
Select to configure the Antenna Handover parameters (when the SLM-5650A is used with the
CRS-311-AH Antenna Handover Switch). This menu is selectable only if the Antenna
Handover FAST option is installed.
Ref Select to configure the modem reference.
Mask Select to mask selected alarms.
Reset Select to reset the modem to a default status.
Remote
Select to define whether the modem is being controlled locally or remotely as well as the
communication parameters (see IMPORTANT note).
The modem may be monitored over the remote control interface at any time.
When in Local mode, however, configuration parameters may only be changed
through the front panel.