Comtech EF Data CTOG-250 - Manual (Page 155)

CTOG-250 Comtech Traffic Optimization Gateway Revision 1
Ethernet-based Remote Product Management MN-CTOG250
7–53
7.4.4.3.3.3 Configuration | Network | Working Mode
See Appendix B. BRIDGE POINT-TO-MULTIPOINT (BPM) OPERATION for more details
on operating a network in BPM Mode.
Figure 7-22. Configuration | Network | Working Mode page
Working Mode
Select the desired working mode:
• In BPM Mode, all L2/L3/L4 protocols such as VLAN, MPLS, IPv6, OSPF, and BGP will flow
through the network as they would through an off-the-shelf Ethernet Switch. The
Advanced VSAT BPM feature makes the Advanced VSAT equipment appear as a “Sky
Ethernet Switch”. This will allow for a greatly simplified network deployment.
• In Router Mode, the traffic ports of the CTOG-250, CDD-880, and CDM-840 are
configured to function as a Router.
Click [Submit] to save.