Comtech EF Data CTOG-250 User Manual
Page 185
CTOG-250 Comtech Traffic Optimization Gateway
Revision 1
Serial-based Remote Product Management
MN-CTOG250
8–9
INSTRUCTION
CODE
USED TO...
C
Q
Page
MLC
Set or query the link configuration for the 10/100/1000 Gigabit Ethernet Management Port “MGMT-1”
X
X
8-13
NPS
Query the negotiated port speeds for the “LAN-1”, “LAN-2”, and “MGMT-1” ports
X
8-13
SRC
Set or query the SNMP Read Community String
X
X
8-13
SWC
Set or Query the SNMP Write Community String
X
X
8-13
These Instruction Codes are explained in complete detail in the tables that follow. Note that the Target-to-Controller Instruction Code
Qualifiers, described earlier, that appear in the “Response to Command” column carry the following meanings:
= Message OK.
? Received OK, but invalid arguments were found.
* Message OK, but not permitted in current mode.
# Message OK, but unit is not in Remote mode.
! Invalid instruction.