Comtech EF Data CDM-760 - Manual (Page 204)

Ethernet-based Remote Product Management Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
7–46
7.4.4.3.9 Configuration | LNB (Low Noise Block Down Converter)
This page is operational only when an optional LOW-NOISE BLOCK DOWN
CONVERTER is installed.
Use this page to configure Low-Noise Block Down Converter parameters. Set the desired LNB
configurations. Click [Submit LNB Controls] to save.
Figure 7-22. Configuration | LNB Page
LNB Control
• Use the LNB DC Power drop-down list to select OFF, 13V, 18V, or 24V.
• Use the LNB Reference Enable drop-down list to select ON or OFF.
• Enter LNB Current Threshold Low and LNB Current Threshold High values from 0 to 500
mA.