Comtech EF Data CDM-760 - Manual (Page 206)

Ethernet-based Remote Product Management Revision 2
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
7–48
• Use the Carrier ID State drop-down list to select operation as On or Off. This setting enables
the transmission of CID information by the modem. The default is On.
Click [Submit] to save your settings.
7.4.4.3.11 Configuration: MEO (Mid-Earth Orbit)
1) You must have a G.703 PIIC plugged into PIIC Slot #1 for any MEO Operational
Modes to be accessible. If a G.703 PIIC is not installed in PIIC Slot #1, then this
page is nonfunctional.
2)
This page is nonfunctional when in Normal (Geostationary) operation (see
Chapter 6. FRONT PANEL OPERATION Sect. 6.2.2.1.2 (CONFIG: NetSpec)
Operating Mode).
Figure 7-24. Configuration | MEO Page