Comtech EF Data CSAT-6070 - Manual (Page 100)

5 to 25 Watt C-Band Transceiver Revision 0
Redundant Systems MN/CSAT607025.IOM
B.2.2 R
X
IF I
NTERFACES
, J9 – J11
The Rx IF output signal is fed to the customers equipment from the RSU-5060 at
connector J9. The RSU-5060 contains a power combiner which takes the IF input signals
from both CSAT A and CSAT B via the J10 and J11 connectors and provides a single
output signal at J9. The IF output power at J9 will nominally be 3dBm less than the IF
input power at either J10 or J11.
B.2.3 M
ECHANICAL
I
NTERFACE
The RSU-5060 is housed in a weather resistant, sealed aluminum housing with five
external circular connectors and six Female N-Type connectors. The mechanical
dimensions and mounting interface are shown in Chapter 1.
B–6