Comtech EF Data CSAT-6070 User Manual
Page 56
Advertising
5 to 25 Watt Model C-Band Transceiver
Revision 0
Installation
MN/CSAT6070.IOM
7. Position the springnuts to line up with four holes in bracket (1, figure 2-2).
8. Secure using screws (3, figure 2-2).
9. Repeat steps (5) and (6-8) for the left bracket (1, figure 2-2).
10. Place a unit on each bracket (1, figure 2-2) and secure with four bolts (2, figure 2-2),
flat (6, figure 2-2) and lock (4, figure 2-2) washers.
Figure 2-20. Installation of the CSAT
Transceivers
11. Position assembled TX switch (1, figure 2-15) on bracket (1, figure 2-11) and secure
with two screws (4), flat washers (2), and lock washers (3).
Figure 2-21 TX Switch installed on
bracket
2–22
Advertising