Comtech EF Data CSAT-6070 - Manual (Page 42)

5 to 25 Watt Model C-Band Transceiver Revision 0
Installation MN/CSAT6070.IOM
12. Place flat washer (7) and split washer (8), and nut (10) on bracket (2). Tighten nut to
secure the tension strap.
13. Slide two springnuts, (5, figure 2-2) into channel of the unistrut bracket
(1, figure 2-1).
14. Place bracket (1, Figure 2-2) over springnuts and secure using screws (3).
Figure 2-6. CSAT Single-Thread Bracket with
Hardware
Figure 2-7. Install CSAT Single-Thread Bracket
Observe the orientation of the “Key”
IMPORTANT
slots used for mounting the CSAT
Transceiver.
2–8