Comtech EF Data CSAT-6070 - Manual (Page 9)

s:\tpubs\manuals\released_word\transceivers\csat506025_rev1\text\mn-c607025.ed0.doc 1
Errata D
Comtech EF Data Documentation Update
Subject: Changes to Appendix B (Supported Communications)
Date: June 18, 2003
Document: CSAT-6070 25 Watt C-Band Transceiver Installation and
Operation Manual, Rev. 0, dated December 5, 2001
Part Number:
MN/C607025.ED0
Collating Instructions: Attach this page to page B-1
Comments:
The following changes provide updated information for Appendix B. This information will be
incorporated into the next revision.
Change Specifics:
Appendix B.REDUNDANT SYSTEMS
B.1 Redundant System ...............................................B-1
B.2 RSU-5060 Interfaces.............................................B-2
B.3 RSU-5060 Operation.............................................B-7
B.4 Configuring A Redundant System .........................B-9
The CSAT-6070, 5 to 25 Watt C-Band Tranceiver, is capable of operating in both stand-alone
and redundant configurations. The CSAT fully redundant system provides automatic detection,
switching, and status for both its configuration and health. The system is designed such that
stand-alone operation is a functional sub-set of the fully redundant CSAT system. This provides
the user with transparent functionality regardless of the mode or complexity the system has been
setup to operate in.
IMPORTANT
Due to the parallel nature of the M&C interface, only EIA-485 and EIA-422
communications are supported through this device.