Daktronics Fuelight FL-3000 and FL-4500 Series 36 and 48 Petroleum Price Display and Cash/Credit Display - Manual (Page 27)

Control Options Setup 21
4. Connect the unterminated end of the quick-connect cable inside the outdoor J-box according to the chart
at right. A label inside the J-box, illustrated in Figure 38, shows connection information.
5. Mount the bulkhead
connector to the display
structure within 8 feet of
any display driver.
6. Plug the terminated end of
the quick-connect cable into
jack J16 on a driver.
Handheld Controller Insert and Code
The handheld controller uses a keypad insert to program
price information for Daktronics LED Fuelight
™ Displays. The
controller’s insert, illustrated in Figure 39, is used to control the
displays.
If an insert is lost or damaged, make a copy from Drawing
A-167856 located in
Appendix A. Cut this to size and slide it
into the controller’s pocket. Use this as a reference until a replacement is
received.
To start the controller and use the insert to program information into the
display driver, follow the instructions in the control quick guide, which
came with the control kit.
Outdoor J-box
Terminal
Wire Color
TB3-4 Black
TB3-3 White
TB3-2 Green
TB3-1 Red
PIN 3 TB3
WHITE
PIN 4 TB3
BLACK
PIN 1 TB3
RED
PIN 2 TB3
GREEN
PIN 4 TB1
GREEN
PIN 2 TB1
BLACK
PIN 3 TB1
WHITE
PIN 1 TB1
RED
LL-2861 REV02
TB3 TO
SIGN
J1 TO DISPLAY
TO
NEXT
J-BOX
TB2
NOT
USED
FROM
PREVIOUS
J-BOX
PIN 3 TB1
RED
PIN 4 TB1
BLACK
PIN 1 TB1
WHITE
PIN 2 TB1
GREEN
IN
TB1
OUT
Figure 38: J-box Label
0
1 2 3
4 5 6
7 8 9
UPDATE
DISPLAY
DIMMING
MENU
ENTER
*
EDIT
CLEAR
SET FUNCTION
LL-2551
DM-100


Figure 39: Handheld Controller Insert