Daktronics Fuelight FL-3000 and FL-4500 Series 36 and 48 Petroleum Price Display and Cash/Credit Display - Manual (Page 32)

26 Using the FLR3-100/400 Key Fob
6. Wait about 10 seconds to set all prices and exit edit mode.
7.6 Edit Cash/Credit Display Hold Time
1. Press and hold the -3 button and the +4 button, as shown in
Figure 45, for about 5 seconds - until the hold time is shown
on the Fuelight display.
Note: 3 seconds is the factory default hold time and is shown
as 30 on the Fuelight display. Hold times range from 2
seconds to 9.9 seconds.
2. Use the -1 and +1 buttons to scroll through hold times until
the desired time is shown.
3. Press and hold the -3 and +4 buttons for about 5 seconds to
set the selection and exit edit mode.
Figure 45: Enter/Exit Hold Time Mode