Daktronics Fuelight FL-3000 and FL-4500 Series 36 and 48 Petroleum Price Display and Cash/Credit Display - Manual (Page 31)

Using the FLR3-100/400 Key Fob 25
7.5 Cash/Credit Price States
Cash/credit displays have three active
price states that can be used in seven
combinations, as shown in the table. In the
example, the active price states Cash, Credit,
and Debit are used.
Note: Cash is the default state.
State 1 – Cash
State 2 – Credit
State 3 – Debit
When in configuration mode, numbers that
represent selected active price states are
shown on the Fuelight display, as shown in
Figure 42 and Figure 43.
Select Active Price States
1. Press and hold the -2 and the +4
buttons, as shown in Figure 44 , for
about 5 seconds - until the decimal
flashes.
2. Use the -1 and +1 buttons to scroll
through the price states until the desired
combination is shown.
3. Press and hold the -2 and +4 buttons for
about 5 seconds to set the selection and
exit edit mode.
Edit Prices on Displays With Cash
Credit Displays
1. Press and hold any button on the key fob for about 5 seconds until the
decimal flashes and the display is in edit mode.
2. When the Cash/Credit display shows its first price state, in this example
Cash, use the minus and plus buttons on the line you are editing to
revise the cash price.
Note: $5 is the starting price when prices are set for the first time.
3. Wait about 10 seconds until the Cash/Credit display shows the second
active price state - Credit. Use the minus and plus buttons on the line
you are editing to revise the credit price.
4. Wait about 10 seconds again until the Cash/Credit display shows Debit,
the third active price state. Use the minus and plus buttons on the line
you are editing to revise the debit price.
5. Repeat the steps above for each line.
Price
State
Number
State 1 State 2 State 3
1
2
1, 2
3
1, 3
2, 3
1, 2, 3
Standard content shown. Custom content is available and will vary
from what appears in this table.
Figure 42: Cash/Credit/Debit
States Selected
Figure 43: Credit/Debit States
Selected
Figure 44: Enter/Exit Active Price
State Configure Mode