Daktronics Fuelight FL-3000 and FL-4500 Series 36 and 48 Petroleum Price Display and Cash/Credit Display - Manual (Page 36)

30 Using the FLR3-1500 and FLD3-2000 Handheld Console
8.5 Display Menu
8.6 Set Petroleum Prices
The LCD on the handheld controller defaults to showing the current display settings on power up. The
following text is shown on the LCD.
8.7 Cash/Credit Active Price States
Cash/credit displays have three active
price states that can be used in seven
combinations, as shown in the table. In the
example, the active price states Cash, Credit,
and Debit are used.
Note: Cash is the default state.
State 1 – Cash
State 2 – Credit
State 3 – Debit
When in configuration mode, numbers that
represent selected active price states are
shown on the DM-100 screen.
LCD Screen Action
PRICE OPTIONS
ENT TO SELECT
ACTIVE PRICES
123 ↓↑
Press the Up and Down Arrow keys to select the Active Price States
(Cash, Credit, Debit), that you want to show on the display. See the
next section for more formation on Active Price States.
Press
ENTER.
Use the Number Keys to change the hold time for Active Price States.
Note: The Default Hold Time is 3 seconds.
Press
ENTER.
SET HOLD TIME
3.0*
LCD Screen Action
LINE - PRICE
1 ↓ $X.XX 9/10
<EDIT> TO MODIFY
1 ↓ $X.XX 9/10
The display toggles between these two screens.
Press the Up and Down Arrow keys to scroll through the current
setting for any of the lines on the display.
Press the ENTER/EDIT key to modify any of the line settings.
Price
State
Number
State 1 State 2 State 3
1
2
1, 2
3
1, 3
2, 3
1, 2, 3
Standard content shown. Custom content is available and will vary
from what appears in this table.