DFI G5C100-NR - Manual (Page 34)

34
2
Hardware Installation
Intel Core Duo/Solo, Core2 Duo CPU FSB Select
Jumpers JP1, JP2 and JP3 are used to select the Front Side Bus of
the CPU.
Important:
•
If you are using a CPU whose frequency has been locked
by the manufacturer, overclocking will have no effect.
• Overclocking may result to the CPU’s or system’s instability
and are not guaranteed to provide better system perform-
ance. If you are unable to boot your system due to
overclocking, make sure to set these jumpers back to their
default settings.
X
Auto Detect
FSB
533MHz FSB
JP1
JP2
JP3
3 1 2 3 1 2
JP1
JP2
JP3