DFI G5C100-NR User Manual

Page 88

Advertising
background image

8 8

3

BIOS Setup

Hot Key Power On

This field is used to select a function key that you would like to use
to power-on the system.

Onboard FDC Controller

Enabled

Enables the onboard floppy disk controller.

Disabled

Disables the onboard floppy disk controller.

PWRON After PWR-Fail

Off

When power returns after an AC power failure, the
system’s power is off. You must press the Power button
to power-on the system.

On

When power returns after an AC power failure, the
system will automatically power-on.

Former-Sts

When power returns after an AC power failure, the
system will return to the state where you left off before
power failure occurs. If the system’s power is off when
AC power failure occurs, it will remain off when power
returns. If the system’s power is on when AC power
failure occurs, the system will power-on when power
returns.

Watchdog Timer Select

The system board supports the Watchdog Timer function allowing
your application to regularly “clear” the system at the time interval
selected in this field. If the system hangs or fails to function, it will
reset at the set time interval so that your system will continue to
operate.

Advertising
This manual is related to the following products: