DFI G5C100-NR - Manual (Page 39)

39
2
Hardware Installation
Jumper Setting
Use JP10 and/or JP11 to set COM 2 and/or COM 4 to RS-232
and/or RS-485. Refer to “COM 2 RS232/AUX Select” and “COM 4
RS232/RS485/AUX Select” in this chapter for more information.
BIOS Setting
Configure the serial ports in the Integrated Peripherals submenu
(“Super IO Device” section) of the BIOS. Refer to chapter 3 for
more information.