DR Power Chipper - Manual (Page 3)

CONTACT US AT www.DRpower.com 3
Chapter 1: General Safety Rules
Labels
Your DR CHIPPER ATTACHMENT carries prominent labels as reminders for its proper and safe use. Shown below are copies of
all the safety and information labels that appear on the equipment. Take a moment to study them and make a note of their
location on your DR CHIPPER ATTACHMENT as you set up and before you operate the unit. Replace damaged or missing safety
and information labels immediately.
#241801
#241991
#241831
# 241811
#241821
#247991
#247961
#247971
#247981

Read this Safety & Operating Instructions manual before you use the DR CHIPPER ATTACHMENT. Become familiar with the
operation and service recommendations to ensure the best performance from your machine.

Thoroughly inspect the area in which you will be working and remove all foreign objects. Look for rope, wire, etc., and remove
these objects before chipping. Inserting these objects into the chipper hopper could damage the machine and/or cause injury.

This is a high-powered machine, with moving parts operating with high energy at high speeds. You must use proper clothing
and safety gear when operating this machine to prevent or minimize the risk of severe injury. This machine can crush, grind,
cut, and sever parts of your body if they enter the inlet or discharge area of your chipper.