DR Power 3-Point Hitch (April 2015 - Present) - Manual (Page 13)

CONTACT US AT www.DRpower.com 13
Greasing the Wheel Support
Tools needed:

Flexible hose grease gun
 Lithium grease

Clean cloth
1. Apply a quality general-purpose lithium grease with a hand-pumped grease
gun to each of the Support Grease Fitting (Figure 24).
The Assembly and installation of your DR Trimmer/Mower is now complete.
Proceed to the next Chapter “Operating the DR 3-POINT HITCH
TRIMMER/MOWER” for operating instructions.
Grease Fitting
Figure 24
Support