DR Power Walk-Behind Pro (2000 - 2001) - Manual (Page 48)

DR
®
TRIMMER/MOWER
™
Assembly & Operating Instructions
Daily Checklist for the DR
®
TRIMMER/MOWER ™
To help maintain your DR
®
for optimum performance, we recommend you
follow this checklist each time you use your machine.
ü
GAS: Fill the gas tank with clean, fresh, unleaded gas. Be careful not to spill
gas on the engine shield. Gasoline will cloud the acrylic. If gas does spill on
the shield, rinse it immediately with soap and water.
ü
OIL: Check the oil level with the dipstick and add more if necessary (only add
oil to the level indicated on the dipstick—do not overfill). Use SAE 30 high
detergent oil.
ü
SPARK PLUG: Clean the spark plug and replace if needed.
ü
AIR FILTER: A clean air filter will mean a much easier-starting and better
running engine. You should replace the paper air filter after every 25 hours of
use, more frequently if you are trimming and mowing in dusty conditions.
ü
ENGINE AIR COOLING SYSTEM: It is very important to keep the engine
clean of debris. Remove grass and other built-up materials from the air intake
screen before, during and after you mow. Regularly remove debris from the
blower housing and cooling fins. A dirty engine retains heat and can cause
damage to the internal engine parts.
ü
BELT: Check the belt for wear, proper alignment and tension.
ü
CUTTING CORDS: Replace broken or frayed cords.
ü
MOW-BALL
™
SUPPORT: Check the Mow-Ball
™
Support for wear.
COUNTRY HOME PRODUCTS
®
Meigs Road, P.O. Box 25, Vergennes, Vermont 05491
1(800)DR-OWNER(376-9637) • www.DR-Owner.com
©2000 CHP, Inc. 144891
CODE:
30161X