DR Power Dual Action 10-Ton Electric (Aug 2011 - Present) - Manual (Page 8)

8 DR ® DUAL-ACTION ELECTRIC LOG SPLITTER
Specifications
Motor 1.8kW, 110V AC Motor
Bed height 24" (610mm)
Wedge 6.61" (168mm) h, .75" (19mm) w/high carbon steel.
Log Trays 27.45in (697mm) L x 11.45in (290mm) W
Force/Tonnage 10 ton
Log Length 20 inches
Log Diameter* 24 inches
Cycle Time Approx. 21 seconds
Wheels & Tires Dot Approved, 4.8/4-8, Steel Wheel With Taper Roller Bearings
Weight 298 lbs (150kg)
Dimensions 64"L X 40.5"W X 38.5"H
Cylinder Size 3" (76mm) Bore, 18.51" (470mm) Stroke
Hydraulic Tank 6 Quarts
Pump Single Stage, 1.58 Gal/min (6 L/minute)
Control Valve Integrated Pressure Relief
Hydraulic Fluid See Table-1 on page 10
*The diameter listed is indicative of the maximum suggested size - a small log can be difficult to split when it contains knots or a
particularly tough fiber. On the other hand, it may not be difficult to split logs with regular fibers even if its diameter exceeds the
maximum indicated above.
Assembling the DR DUAL-ACTION ELECTRIC LOG SPLITTER
Tools and Supplies Needed:
 Two 3/4" Wrenches

1-1/2" Wrench

Pliers
 Soft Face Hammer

Two 1/2" Wrenches

7/8" Wrench
 17mm Wrench

Two 7/16" Wrenches

Jack Stands
 Utility Knife

Wire Cutters

Safety Glasses