Dumping - electric – DR Power Powerwolf Power Wagon User Manual
Page 21
DR
Powerwolf
Safety & Operating Instructions
15
Dumping - Electric
If your DR Powerwolf
is equipped with the electric dump feature:
1. Engage parking brake.
2. Remove front panel.
3. Return to the operator's seat.
4. Push up and hold dump control
switch (Figure 6).
5. Hold switch until bed reaches the
desired dump angle.
Note:
On flat ground only, you can help a
load dump completely by backing
up slightly with the bed tipped up.
Release parking brake, then back
up slowly and carefully.
On a hill or uneven terrain do not
move the machine with the bed
up. Keep the parking brake set and
shovel out any load that doesn't tip
out.
6. Push down and hold the dump
control switch to lower the bed. Make
sure the bed has returned completely
to the horizontal position before
moving the DR Powerwolf.
Note:
Raising the bed when the battery is
dead requires first unbolting the
actuator.
Figure 6: Dump Control Switch
Figure 7: Electric Dump Mechanism
Dump Bed
Control
Switch