Removing and replacing the rear wheels – DR Power Powerwolf Power Wagon User Manual
Page 29
Advertising
DR
Powerwolf
Safety & Operating Instructions
23
Removing and Replacing the Rear Wheels
WARNING!
Before performing any maintenance procedure, stop the
engine, set the parking brake, and disconnect the spark plug wire.
Tools Needed:
§ Ratchet, 1/2" socket
§ Eye protection
§ Pliers
1. Lift and block up the machine so that wheels are off the ground.
2. Remove the lock bolt and washer, then slide the wheel off.
3. Slide the replacement wheel onto the hub and replace the lock bolt and washer.
4. Tighten lock bolt securely.
5. Lower machine to the ground.
Figure 15: Rear Wheel
Washer
Lock Bolt
Advertising