Free wheel mode – DR Power Powerwolf Power Wagon User Manual
Page 22
16 DR
Powerwolf
Safety & Operating Instructions
Free Wheel Mode
Note:
The DR Powerwolf employs a hydrostatic transmission, which – unlike a
mechanical transmission – does not have a neutral setting. In order to move the
machine when the engine isn't running , you need to put it into Free Wheel Mode.
1. Set the parking brake.
2. Locate the Free Wheel Lever on the
front left corner of the machine's
frame below the dump bed. (Figure 8)
3. Push lever in until notch in lever
aligns with the narrow part of the
keyhole slot.
4. Seat the notch in the lever into the
narrow part of the keyhole slot so
that the lever is held in the pushed-in
position. (Figure 9)
5. With parking brake released, the DR
Powerwolf can be rolled freely
forward or backward. Set the parking
brake whenever machine is to be left
unattended.
6. To re-engage the hydrostatic
transmission, raise the Free Wheel
lever to release it from narrow part
of keyhole slot and pull it back out to
the normal position.
Figure 8: Free Wheel Lever
Figure 9: Normal Operating Position
Free Wheel
Lever
Notch
Keyhole
Slot