Changing the engine oil – DR Power Powerwolf Power Wagon User Manual

Page 26

Advertising
background image

20

DR

Powerwolf

Safety & Operating Instructions

Changing the Engine Oil

WARNING!

Before performing any maintenance procedure, set the

parking brake, stop the engine and disconnect the spark plug wire.

Tools & Supplies Recommended:
§ 3/8" Ratchet and extension
§ Adjustable wrench
§ SAE 30 High Detergent (HD) Oil – 48 oz.
§ Suitable container for the old oil
§ Rag or cloth
§ Liquid Vac Oil Drainer, item # 16145 (optional accessory, sold separately)

1. Allow the engine to cool and remove the

oil drain plug from the bottom of the

engine (Figure 11) and drain the oil.

2. Replace the plug and refill the oil to the

level indicated on the dipstick. Do not
overfill. Reference the Adding Oil and
Gasoline section on page 9.

3. Start engine and run it for a few seconds;

turn it off, wait five minutes and then re-
check oil level.

Alternate Method
1. Remove the Oil Fill Cap and vacuum the

oil from the engine through the oil fill tube
using the recommended oil drainer.

Figure 11: Oil Fill and Drain

Note:

If the oil is not to be reused, be sure to use environmentally safe disposal

procedures.

Oil Drain

Oil Fill

Advertising