Removing and replacing the front wheels – DR Power Powerwolf Power Wagon User Manual
Page 28
Advertising
22 DR
Powerwolf
Safety & Operating Instructions
Removing and Replacing the Front Wheels
WARNING!
Before performing any maintenance procedure, stop the
engine, set the parking brake, and disconnect the spark plug wire.
Tools Needed:
§ Ratchet, ¾" socket, extension
§ Eye protection
1. Loosen lug nuts slightly before raising wheels from ground.
2. Lift and block up the machine so that wheels are off the ground.
3. Remove the lug nuts (Figure 14) and slide the wheel off.
4. Slide the replacement wheel onto the hub and position it on the lugs.
5. Replace lug nuts and turn them finger tight.
6. Lower machine to the ground.
7. Tighten lug nuts securely.
Figure 14: Front Wheel
Lug Nuts
Advertising