ESI WaMi Rack 192L - Manual (Page 19)

ESI WaMi Rack 192 Series
20
1. Pull Down Menu
The WaMi Rack 192 Series
console includes a pull down menu bar that contains the
configuration menus for the Console.
1. File - Exit
File – Exit will close the WaMi Rack 192 Series Console window but it will not shut
down the Console. You can always launch the Console by clicking icon on the
system tray.
2. Config – Mouse Wheel
Mouse Wheel will control the mouse wheel adjustment. When you use the mouse wheel
to adjust the volume level, the adjustment step is set to
±1.5dB as default. You can
configure the adjustment steps to your preference.
- Step 1: When you move the mouse wheel one step, the fader will move by
±1.5dB.
- Step 2: When you move the mouse wheel one step, the fader will move by ±3.0dB.
- Step 4: When you move the mouse wheel one step, the fader will move by ±6.0dB.
- Step 8: When you move the mouse wheel one step, the fader will move by ±12.0dB.
3. Config – Latency
This will decide the latency of the WaMi Rack 192 Series. You have to set proper