ESI WaMi Rack 192L - Manual (Page 42)

ESI WaMi Rack 192 Series
43
<WaMi Rack 192L>
1. Analog Input Specification
1) Type : 4 Channel analog input
* 4 Unbalanced 1/4" TRS Phone Jack(Line in)
* 4 Balanced XLR Connector(Line in, Mic in)
2) Level :
* +4dBu UnBalanced, +4dBu Nominal, +17dBu Max (Gain +0dB)
* +4dBu Balanced, +4dBu Nominal, +22.5dBu Max (Gain +0dB)
3) Gain Adjustment : +0dB ~ +20dB
4) Impedance : 10K Ohm
2. Analog Output Specification
1) Type : 8 Channel analog line output
* 8 Unbalanced 1/4" TRS Phone Jack
* 2 Balanced XLR Connector(OUT1,2)
2) Level :
* +4dBu UnBalanced, +4dBu Nominal, +17dBu Max (Gain +0dB)
* +4dBu Balanced, +4dBu Nominal, +22.5dBu Max (Gain +0dB)
3) Attenuation : Digital 0dB ~ -96dB with mute, 0.75 step size
4) Impedance : 100 Ohm
3. Mic Preamplifier Specification
1) Sensitive : 66.5mV Max
2) Gain Adjustment : +20dB ~ +40dB
3) Impedance : 1.5K ohm
4) +48V Phantom Power
4. Headphone Amplifier Specification
1) Output Power : 60mW Max
2) Signal to Noise Ratio: 110dB (Typical)
3) (THD+N)/S : -70dB, 0.03% (Typical)
5. Sample rate spports : 16,22,24,32,44.1,48,88.2,96,176.4,192 KHz(176.4,192Khz only playback)
6. A/D Converter Specification