ESI WaMi Rack 192L - Manual (Page 5)

ESI WaMi Rack 192 Series
6
2. Description of WaMi Rack 192 Series
Here are the short descriptions of WaMi Rack 192 Series’s outlook.
1. Front Panel
(1)
(2) (5)
(3)
(4)
1) MIC/Line Input Level knob: Control the amount of input level through XLR type of
each MIC input or Line input through the TRS connectors on the rear panel of WaMi
Rack 192 Series.
2) MIC Input port: 4 low-Z XLR type MIC Input ports
3) Phantom Power switch: 48VDC of Phantom Power will be supplied by depressing the
buttons, each switch covers stereo pair.
4) MIC switch: When the switch is depressed, MIC Input engaged as input source, while
in normal position, when it is not depressed, Line Input will be chosen for input source.
5) Headphone Output and level knob: You can monitor all the input sources and wave
output1,2 through this headphone output. Output level can be adjusted with the pot.
2. Rear Panel
(1) (2) (3) (4) (5)