ESI WaMi Rack 192L - Manual (Page 8)

ESI WaMi Rack 192 Series
9
2. Preparation for hardware installation
WaMi Rack 192 Series PCI card and other components in the computer can be easily
damaged by electrical shock. You need to use an anti-static device that can discharge the
static electricity of your body to avoid potential static damage to the cards.
1. WaMi Rack 192 Series PCI card is placed into the anti static plastic pouch as it
is packaged. Do not open the pouch before you install the card.
2. Turn off the computer power and remove the power cable from your computer
power supply.
3. Remove the computer cover. Make sure that you have an available PCI slot in
your motherboard to install WaMi Rack 192 Series. Please, refer to your
computer user’s manual to remove the cover.
4. To avoid possible static shock to the computer parts, discharge it by touching
the computer case or something grounded. We recommend you to use an anti-
static device such as an anti-static wrist band.
5. When you need to hold the WaMi Rack 192 Series PCI card, please hold it on
the guide or he edge of card. Do not grab the card by the board.