Flowserve ESP2 User Manual
User instructions, Installation operation maintenance, Esp2 vertical immersion sump pump
Advertising
Table of contents
Document Outline
- Installation
- Operation
- Maintenance
- CONTENTS
- 1 INTRODUCTION AND SAFETY
- 1.1 General
- 1.2 CE marking and approvals
- 1.3 Disclaimer
- 1.4 Copyright
- 1.5 Duty conditions
- 1.6 Safety
- 1.7 Name plate and safety labels
- 1.8 Noise level
- ( For units driven by equipment other than electric motors or units contained within enclosures, see the accompanying information sheets and manuals.
- Typical sound pressure level, dBA, LpA at 1 m reference 20 μPa
- 2 TRANSPORT AND STORAGE
- Immediately after receipt of the equipment it must be checked against the delivery/shipping documents for its completeness and that there has been no damage in transportation. Any shortage and/or damage must be reported immediately to Flowserve Pump ...
- 3 DESCRIPTION
- Figure 3-1: Nameplate mounted to housing
- 4 INSTALLATION
- 5 COMMISSIONING, STARTUP, OPERATION AND SHUTDOWN
- 6 MAINTENANCE
- 7 Faults; Causes and Remedies
- wwwwwwwwwwwwwwwwwwwwwwwwwwwww 8 PARTS LIST AND DRAWINGS
- 9 CERTIFICATION
- 10 OTHER RELEVANT DOCUMENTATION AND MANUALS
- USA and Canada
- Europe, Middle East, Africa
- Latin America and Caribbean
- Asia Pacific
- Flowserve Pump Division
- 3900 Cook Boulevard
- Chesapeake, VA 23323-1626 USA
- Telephone +1 757 485 8000
- Fax +1 757 485 8149
- Flowserve Pumps Limited
- PO Box 17, Newark, Notts NG 24 3BU
- United Kingdom
- Telephone (24 hours) +44 (0)1636 494 600
- Sales & Admin Fax +44 (0)1636 705 991
- Repair & Service Fax +44 (0)1636 494 833
- E-mail [email protected]