Formax 6204 Series - Manual (Page 22)

Loading Envelopes
Before you load the envelopes, make sure the envelope separation and side guides are
correctly set. Proceed as follows:
1. Rotate thumb wheel D to move the side guides C apart.
If the distance between the side guides is too large, the envelopes
will twist sidewards, when transported into the machine.
2. Turn knob A counter-clockwise as far as possible.
3. Slide an envelope (with closed flap) between the rollers in the machine and turn knob
A clockwise until a slight resistance is felt when moving the envelope in and out of
the machine.
4. When the resistance is too high, turn knob A counter-clockwise, until only a slight
resistance is felt.
2
English
17
| Page 17 | apr-16-2012 13:09 |