Formax 6204 Series - Manual (Page 62)

OMR advanced license
For the OMR advanced license the following functions are available:
• The basic functions (Start, Insert, Parity, Safety)
• Divert - The machine stops, manually remove the set from the collator. Reset and
start again.
• Stop - The machine stops, manually remove the set from the collator. Reset and start
again.
• Selective Feed - The machine will selectively feed an enclosure when commanded
so.
• Sequence Check - Sheets in a stack can accidentally get out of sequence or can be
missing. This can be detected by the sequence check. Each sheet has a binary code
that is a part of the reading code. Depending on the application one, two or three
marks are used by sequence check.
OMR general remarks
General remarks:
• In case of OMR the marks must always be used in the sequence as shown in the
figure.
• If a function is suppressed the following function will move upwards one line.
• The mark definition is a service setting.
7
English
57
| Page 57 | apr-16-2012 13:09 |