Formax 6204 Series - Manual (Page 25)

2. Fill the reservoir B to the "Max" lip C with sealing liquid.
3. Close the front cover A.
Before starting the job, wait approximately 5 minutes for the brushes to moisten.
Before starting the job, wait approximately 5 minutes for the brushes to moisten or use
moistened brushes. For instructions on the installation of brushes, see
Clean and replace
brushes on page 61.
For good moistening, regularly check that the sealing liquid reservoir is filled.
Shut Down the System
1. Use the power switch to switch off the system. The power switch is located on the
right-hand side of the system.
20
| Page 20 | apr-16-2012 13:09 |
2
English