Formax 7200 Series - Manual (Page 30)

29
15
You now have a
choice: carry on to select
further enclosures if re-
quired, remove the enclo-
sure you have selected,
or further define the en-
closure usage, eg. form
count, cascading, hand-
fold etc.
The following assumes you
want to further define the
enclosure usage. When
you have finished you
will return to the screen
shown here.
Press the Settings button. Settings and Advanced Settings are same for en-
closures as for documents - see steps 12 & 13.
Paper is normally loaded in the Tower face-up and feet-first if non-
reading, face down and head-first if reading. This may vary: see
also orientation chart in section 8.3.